- EACCESS - Static variable in class zmq.ZError
-
- EADDRINUSE - Static variable in class zmq.ZError
-
- EADDRNOTAVAIL - Static variable in class zmq.ZError
-
- EAGAIN - Static variable in class zmq.ZError
-
- ECONNREFUSED - Static variable in class zmq.ZError
-
- EFAULT - Static variable in class zmq.ZError
-
- EFSM - Static variable in class zmq.ZError
-
- EHOSTUNREACH - Static variable in class zmq.ZError
-
- EINPROGRESS - Static variable in class zmq.ZError
-
- EINTR - Static variable in class zmq.ZError
-
- EINVAL - Static variable in class zmq.ZError
-
- EIOEXC - Static variable in class zmq.ZError
-
- EISCONN - Static variable in class zmq.ZError
-
- element() - Method in class org.zeromq.ZMsg
-
- EMFILE - Static variable in class zmq.ZError
-
- EMTHREAD - Static variable in class zmq.ZError
-
- Encoder - Class in zmq
-
- Encoder(int) - Constructor for class zmq.Encoder
-
- EncoderBase - Class in zmq
-
- EncoderBase(int) - Constructor for class zmq.EncoderBase
-
- encodingError() - Method in class zmq.EncoderBase
-
- ENETDOWN - Static variable in class zmq.ZError
-
- ENOBUFS - Static variable in class zmq.ZError
-
- ENOCOMPATPROTO - Static variable in class zmq.ZError
-
- ENOTCONN - Static variable in class zmq.ZError
-
- ENOTSOCK - Static variable in class zmq.ZError
-
- ENOTSUP - Static variable in class zmq.ZError
-
- entract() - Method in interface org.zeromq.ZStar.Star
-
Called as an interval between each act.
Hint: Can be used to perform decisions to continue next loop or not, or to send computed data to outputs, or ...
Key point: at the end of a loop.
Decision: to act on the next loop or not
- entrySet() - Method in class zmq.MultiMap
-
- EPROTONOSUPPORT - Static variable in class zmq.ZError
-
- equals(Object) - Method in class org.zeromq.ZFrame
-
- equals(Object) - Method in class org.zeromq.ZMQ.PollItem
-
- equals(Object) - Method in class org.zeromq.ZMsg
-
- equals(Object) - Method in class org.zeromq.ZPoller.ZPollItem
-
- equals(Object) - Method in class zmq.Blob
-
- ERR - Static variable in class org.zeromq.ZPoller
-
- errno - Variable in class zmq.SocketBase
-
- errno() - Method in class zmq.SocketBase
-
- error(SelectableChannel) - Method in class org.zeromq.ZPoller
-
- error(ZMQ.Socket) - Method in class org.zeromq.ZPoller
-
- error(Object) - Method in class org.zeromq.ZPoller
-
- ESOCKET - Static variable in class zmq.ZError
-
- ETERM - Static variable in class zmq.ZError
-
- Event(int, Object, String) - Constructor for class org.zeromq.ZMQ.Event
-
- Event(int, String, Object) - Constructor for class zmq.ZMQ.Event
-
- event - Variable in class zmq.ZMQ.Event
-
- EVENT_ACCEPT_FAILED - Static variable in class org.zeromq.ZMQ
-
EVENT_ACCEPT_FAILED: could not accept client connection.
- EVENT_ACCEPTED - Static variable in class org.zeromq.ZMQ
-
EVENT_ACCEPTED: connection accepted to bound interface.
- EVENT_ALL - Static variable in class org.zeromq.ZMQ
-
EVENT_ALL: all events known.
- EVENT_BIND_FAILED - Static variable in class org.zeromq.ZMQ
-
EVENT_BIND_FAILED: socket could not bind to an address.
- EVENT_CLOSE_FAILED - Static variable in class org.zeromq.ZMQ
-
EVENT_CLOSE_FAILED: connection couldn't be closed.
- EVENT_CLOSED - Static variable in class org.zeromq.ZMQ
-
EVENT_CLOSED: connection closed.
- EVENT_CONNECT_DELAYED - Static variable in class org.zeromq.ZMQ
-
EVENT_CONNECT_DELAYED: synchronous connect failed, it's being polled.
- EVENT_CONNECT_RETRIED - Static variable in class org.zeromq.ZMQ
-
EVENT_CONNECT_RETRIED: asynchronous connect / reconnection attempt.
- EVENT_CONNECTED - Static variable in class org.zeromq.ZMQ
-
EVENT_CONNECTED: connection established.
- EVENT_DELAYED - Static variable in class org.zeromq.ZMQ
-
Deprecated.
- EVENT_DISCONNECTED - Static variable in class org.zeromq.ZMQ
-
EVENT_DISCONNECTED: broken session.
- EVENT_LISTENING - Static variable in class org.zeromq.ZMQ
-
EVENT_LISTENING: socket bound to an address, ready to accept connections.
- EVENT_MONITOR_STOPPED - Static variable in class org.zeromq.ZMQ
-
EVENT_MONITOR_STOPPED: monitor has been stopped.
- EVENT_RETRIED - Static variable in class org.zeromq.ZMQ
-
Deprecated.
- eventAccepted(String, SelectableChannel) - Method in class zmq.SocketBase
-
- eventAcceptFailed(String, int) - Method in class zmq.SocketBase
-
- eventBindFailed(String, int) - Method in class zmq.SocketBase
-
- eventClosed(String, SelectableChannel) - Method in class zmq.SocketBase
-
- eventCloseFailed(String, int) - Method in class zmq.SocketBase
-
- eventConnectDelayed(String, int) - Method in class zmq.SocketBase
-
- eventConnected(String, SelectableChannel) - Method in class zmq.SocketBase
-
- eventConnectRetried(String, int) - Method in class zmq.SocketBase
-
- eventDisconnected(String, SelectableChannel) - Method in class zmq.SocketBase
-
- eventListening(String, SelectableChannel) - Method in class zmq.SocketBase
-
- events(ZMQ.Socket, int) - Method in interface org.zeromq.ZPoller.EventsHandler
-
Called when the poller intercepts events.
- events(SelectableChannel, int) - Method in interface org.zeromq.ZPoller.EventsHandler
-
Called when the poller intercepts events.
- exit(boolean) - Method in class org.zeromq.ZProxy
-
Stops the proxy and exits.
- EXITED - Static variable in class org.zeromq.ZProxy
-
- PAIR - Static variable in class org.zeromq.ZMQ
-
Flag to specify a exclusive pair of sockets.
- Pair - Class in zmq
-
- Pair(Ctx, int, int) - Constructor for class zmq.Pair
-
- Pair.PairSession - Class in zmq
-
- PairSession(IOThread, boolean, SocketBase, Options, Address) - Constructor for class zmq.Pair.PairSession
-
- party(long, TimeUnit) - Static method in class org.zeromq.ZStar
-
- party(ZContext) - Method in interface org.zeromq.ZStar.TimeTaker
-
Called when the show is finished but no cleaning is still done.
- pause(boolean) - Method in class org.zeromq.ZProxy
-
Pauses the proxy.
- PAUSED - Static variable in class org.zeromq.ZProxy
-
- peek() - Method in class org.zeromq.ZMsg
-
- peekFirst() - Method in class org.zeromq.ZMsg
-
- peekLast() - Method in class org.zeromq.ZMsg
-
- pipe() - Method in interface org.zeromq.ZAgent
-
Returns the socket used for communication.
- pipe() - Method in class org.zeromq.ZAgent.SimpleAgent
-
- pipe() - Method in class org.zeromq.ZStar
-
- pipeTerminated(Pipe) - Method in class zmq.SocketBase
-
- plug(IOThread, SessionBase) - Method in interface zmq.IEngine
-
- plug(IOThread) - Method in class zmq.IOObject
-
- plug(IOThread, SessionBase) - Method in class zmq.StreamEngine
-
- poll(ZMQ.PollItem[], long) - Static method in class org.zeromq.ZMQ
-
- poll(ZMQ.PollItem[], int, long) - Static method in class org.zeromq.ZMQ
-
- poll() - Method in class org.zeromq.ZMQ.Poller
-
Issue a poll call.
- poll(long) - Method in class org.zeromq.ZMQ.Poller
-
Issue a poll call, using the specified timeout value.
- poll() - Method in class org.zeromq.ZMsg
-
- poll(long) - Method in class org.zeromq.ZPoller
-
Issue a poll call, using the specified timeout value.
- poll(long, boolean) - Method in class org.zeromq.ZPoller
-
Issue a poll call, using the specified timeout value.
- poll(Selector, long, Collection<PollItem>) - Method in class org.zeromq.ZPoller
-
- poll(PollItem[], long) - Static method in class zmq.ZMQ
-
Polling on items.
- poll(PollItem[], int, long) - Static method in class zmq.ZMQ
-
Polling on items.
- poll(Selector, PollItem[], long) - Static method in class zmq.ZMQ
-
Polling on items with given selector
CAUTION: This could be affected by jdk epoll bug
- poll(Selector, PollItem[], int, long) - Static method in class zmq.ZMQ
-
Polling on items with given selector
CAUTION: This could be affected by jdk epoll bug
- poller() - Method in class org.zeromq.ZMQ.Context
-
- poller(int) - Method in class org.zeromq.ZMQ.Context
-
- Poller(int) - Constructor for class org.zeromq.ZMQ.Poller
-
- Poller(ZMQ.Context, int) - Constructor for class org.zeromq.ZMQ.Poller
-
Class constructor.
- Poller(ZMQ.Context) - Constructor for class org.zeromq.ZMQ.Poller
-
Class constructor.
- Poller - Class in zmq
-
- Poller() - Constructor for class zmq.Poller
-
- Poller(String) - Constructor for class zmq.Poller
-
- POLLERR - Static variable in class org.zeromq.ZMQ.Poller
-
- pollerr(int) - Method in class org.zeromq.ZMQ.Poller
-
Check whether the specified element in the poll set was signaled for error.
- POLLERR - Static variable in class org.zeromq.ZPoller
-
- pollFirst() - Method in class org.zeromq.ZMsg
-
- POLLIN - Static variable in class org.zeromq.ZMQ.Poller
-
These values can be ORed to specify what we want to poll for.
- pollin(int) - Method in class org.zeromq.ZMQ.Poller
-
Check whether the specified element in the poll set was signaled for input.
- POLLIN - Static variable in class org.zeromq.ZPoller
-
These values can be ORed to specify what we want to poll for.
- PollItem(ZMQ.Socket, int) - Constructor for class org.zeromq.ZMQ.PollItem
-
- PollItem(SelectableChannel, int) - Constructor for class org.zeromq.ZMQ.PollItem
-
- PollItem - Class in zmq
-
- PollItem(SocketBase) - Constructor for class zmq.PollItem
-
- PollItem(SocketBase, int) - Constructor for class zmq.PollItem
-
- PollItem(SelectableChannel, int) - Constructor for class zmq.PollItem
-
- pollLast() - Method in class org.zeromq.ZMsg
-
- POLLOUT - Static variable in class org.zeromq.ZMQ.Poller
-
- pollout(int) - Method in class org.zeromq.ZMQ.Poller
-
Check whether the specified element in the poll set was signaled for output.
- POLLOUT - Static variable in class org.zeromq.ZPoller
-
- pop() - Method in class org.zeromq.ZMsg
-
- pop() - Method in class zmq.YQueue
-
- popString() - Method in class org.zeromq.ZMsg
-
Pop a ZFrame and return the toString() representation of it.
- premiere(ZMQ.Socket) - Method in interface org.zeromq.ZActor.Actor
-
This is the grand premiere!
Called before the creation of the first double and the sockets
2nd in the order call of the global acting.
- premiere(ZMQ.Socket) - Method in class org.zeromq.ZActor.Duo
-
- premiere(ZMQ.Socket) - Method in class org.zeromq.ZActor.SimpleActor
-
- premiere(ZMQ.Socket, Object[]) - Method in interface org.zeromq.ZStar.Fortune
-
This is the grand premiere!
Called when the star enters the plateau.
- prepare() - Method in interface org.zeromq.ZStar.Star
-
Called when the star is in the wings.
Hint: Can be used to initialize the service, or ...
Key point: no loop has started already.
- print(String) - Method in class org.zeromq.ZFrame
-
- probe() - Method in class zmq.YPipe
-
- processActivateRead() - Method in class zmq.ZObject
-
- processActivateWrite(long) - Method in class zmq.ZObject
-
- processAttach(IEngine) - Method in class zmq.ZObject
-
- processBind(Pipe) - Method in class zmq.SocketBase
-
- processBind(Pipe) - Method in class zmq.ZObject
-
- processBuffer(ByteBuffer, int) - Method in class zmq.DecoderBase
-
- processBuffer(ByteBuffer, int) - Method in interface zmq.IDecoder
-
- processCommand(Command) - Method in class zmq.ZObject
-
- processDestroy() - Method in class zmq.SocketBase
-
- processHiccup(Object) - Method in class zmq.ZObject
-
- processOwn(Own) - Method in class zmq.ZObject
-
- processPipeTerm() - Method in class zmq.ZObject
-
- processPipeTermAck() - Method in class zmq.ZObject
-
- processPlug() - Method in class zmq.TcpConnecter
-
- processPlug() - Method in class zmq.TcpListener
-
- processPlug() - Method in class zmq.ZObject
-
- processReap(SocketBase) - Method in class zmq.Reaper
-
- processReap(SocketBase) - Method in class zmq.ZObject
-
- processReaped() - Method in class zmq.Reaper
-
- processReaped() - Method in class zmq.ZObject
-
- processSeqnum() - Method in class zmq.ZObject
-
- processStop() - Method in class zmq.IOThread
-
- processStop() - Method in class zmq.Reaper
-
- processStop() - Method in class zmq.SocketBase
-
- processStop() - Method in class zmq.ZObject
-
- processTerm(int) - Method in class zmq.SocketBase
-
- processTerm(int) - Method in class zmq.TcpConnecter
-
- processTerm(int) - Method in class zmq.TcpListener
-
- processTerm(int) - Method in class zmq.ZObject
-
- processTermAck() - Method in class zmq.ZObject
-
- processTermReq(Own) - Method in class zmq.ZObject
-
- protocol() - Method in class zmq.Address
-
- proxy(ZMQ.Socket, ZMQ.Socket, ZMQ.Socket) - Static method in class org.zeromq.ZMQ
-
Starts the built-in 0MQ proxy in the current application thread.
- Proxy - Class in zmq
-
- proxy(SocketBase, SocketBase, SocketBase) - Static method in class zmq.Proxy
-
- proxy(SocketBase, SocketBase, SocketBase) - Static method in class zmq.ZMQ
-
- PUB - Static variable in class org.zeromq.ZMQ
-
Flag to specify a PUB socket, receiving side must be a SUB or XSUB.
- Pub - Class in zmq
-
- Pub(Ctx, int, int) - Constructor for class zmq.Pub
-
- Pub.PubSession - Class in zmq
-
- PubSession(IOThread, boolean, SocketBase, Options, Address) - Constructor for class zmq.Pub.PubSession
-
- PULL - Static variable in class org.zeromq.ZMQ
-
Flag to specify the receiving part of a PUSH socket.
- pullMsg() - Method in interface zmq.IMsgSource
-
- PUSH - Static variable in class org.zeromq.ZMQ
-
Flag to specify a PUSH socket, receiving side must be a PULL.
- push(String) - Method in class org.zeromq.ZMsg
-
- push(byte[]) - Method in class org.zeromq.ZMsg
-
- push(ZFrame) - Method in class org.zeromq.ZMsg
-
- Push - Class in zmq
-
- Push(Ctx, int, int) - Constructor for class zmq.Push
-
- push(T) - Method in class zmq.YQueue
-
- Push.PushSession - Class in zmq
-
- pushMsg(Msg) - Method in interface zmq.IMsgSink
-
- pushMsg(Msg) - Method in class zmq.Req.ReqSession
-
- pushMsg(Msg) - Method in class zmq.StreamEngine
-
- PushSession(IOThread, boolean, SocketBase, Options, Address) - Constructor for class zmq.Push.PushSession
-
- put(byte) - Method in class zmq.Msg
-
- put(int, byte) - Method in class zmq.Msg
-
- put(byte[]) - Method in class zmq.Msg
-
- put(byte[], int, int) - Method in class zmq.Msg
-
- put(ByteBuffer) - Method in class zmq.Msg
-
- put(K, V) - Method in class zmq.MultiMap
-
- putAll(Map<? extends K, ? extends V>) - Method in class zmq.MultiMap
-
- rdtsc() - Static method in class zmq.Clock
-
- read() - Method in class zmq.YPipe
-
- read(SocketBase, int) - Static method in class zmq.ZMQ.Event
-
- read(SocketBase) - Static method in class zmq.ZMQ.Event
-
- readable(SelectableChannel) - Method in class org.zeromq.ZPoller
-
- readable(ZMQ.Socket) - Method in class org.zeromq.ZPoller
-
- readable(Object) - Method in class org.zeromq.ZPoller
-
- readActivated(Pipe) - Method in class zmq.SocketBase
-
- readyOps() - Method in class org.zeromq.ZMQ.PollItem
-
- readyOps(SelectionKey, int) - Method in class zmq.PollItem
-
- readyOps() - Method in class zmq.PollItem
-
- Reaper - Class in zmq
-
- Reaper(Ctx, int) - Constructor for class zmq.Reaper
-
- REAPER_TID - Static variable in class zmq.Ctx
-
- recv() - Method in interface org.zeromq.ZAgent
-
Receives a control message sent from the Plateau in the Corbeille.
- recv(boolean) - Method in interface org.zeromq.ZAgent
-
Receives a control message sent from the Plateau in the Corbeille.
- recv() - Method in class org.zeromq.ZAgent.SimpleAgent
-
- recv(boolean) - Method in class org.zeromq.ZAgent.SimpleAgent
-
- recv(ZMQ.Socket, int) - Static method in class org.zeromq.ZMQ.Event
-
Receive an event from a monitor socket.
- recv(ZMQ.Socket) - Static method in class org.zeromq.ZMQ.Event
-
Receive an event from a monitor socket.
- recv() - Method in class org.zeromq.ZMQ.Socket
-
Receive a message.
- recv(int) - Method in class org.zeromq.ZMQ.Socket
-
Receive a message.
- recv(byte[], int, int, int) - Method in class org.zeromq.ZMQ.Socket
-
Receive a message in to a specified buffer.
- recv() - Method in class org.zeromq.ZStar
-
- recv(boolean) - Method in class org.zeromq.ZStar
-
- recv(long) - Method in class zmq.Mailbox
-
- recv() - Method in class zmq.Signaler
-
- recv(int) - Method in class zmq.SocketBase
-
- recv(SocketBase, int) - Static method in class zmq.ZMQ
-
- recvByteBuffer(ByteBuffer, int) - Method in class org.zeromq.ZMQ.Socket
-
Receive a message into the specified ByteBuffer
- recvFrame(ZMQ.Socket) - Static method in class org.zeromq.ZFrame
-
Receives single frame from socket, returns the received frame object, or null if the recv
was interrupted.
- recvFrame(ZMQ.Socket, int) - Static method in class org.zeromq.ZFrame
-
Receive a new frame off the socket, Returns newly-allocated frame, or
null if there was no input waiting, or if the read was interrupted.
- recviov(SocketBase, byte[][], int, int) - Method in class zmq.ZMQ
-
- recvMsg(ZMQ.Socket) - Static method in class org.zeromq.ZMsg
-
Receives message from socket, returns ZMsg object or null if the
recv was interrupted.
- recvMsg(ZMQ.Socket, int) - Static method in class org.zeromq.ZMsg
-
Receives message from socket, returns ZMsg object or null if the
recv was interrupted.
- recvMsg(SocketBase, int) - Static method in class zmq.ZMQ
-
- recvStr() - Method in class org.zeromq.ZMQ.Socket
-
- recvStr(int) - Method in class org.zeromq.ZMQ.Socket
-
- register(ZMQ.Socket) - Method in class org.zeromq.ZMQ.Poller
-
Register a Socket for polling on all events.
- register(ZMQ.Socket, int) - Method in class org.zeromq.ZMQ.Poller
-
Register a Socket for polling on the specified events.
- register(SelectableChannel, int) - Method in class org.zeromq.ZMQ.Poller
-
Register a Socket for polling on the specified events.
- register(ZMQ.PollItem) - Method in class org.zeromq.ZMQ.Poller
-
Register a Channel for polling on the specified events.
- register(ZMQ.Socket, ZPoller.EventsHandler, int) - Method in class org.zeromq.ZPoller
-
Register a Socket for polling on specified events.
- register(ZMQ.Socket, ZPoller.EventsHandler) - Method in class org.zeromq.ZPoller
-
- register(ZMQ.Socket, int) - Method in class org.zeromq.ZPoller
-
- register(SelectableChannel, ZPoller.EventsHandler, int) - Method in class org.zeromq.ZPoller
-
Register a SelectableChannel for polling on specified events.
- register(SelectableChannel, ZPoller.EventsHandler) - Method in class org.zeromq.ZPoller
-
- register(SelectableChannel, int) - Method in class org.zeromq.ZPoller
-
- register(ZPoller.ItemHolder) - Method in class org.zeromq.ZPoller
-
Register an ItemHolder for polling on specified events.
- registerEndpoint(String, Ctx.Endpoint) - Method in class zmq.ZObject
-
- remaining() - Method in class zmq.Transfer.ByteBufferTransfer
-
- remaining() - Method in class zmq.Transfer.FileChannelTransfer
-
- remaining() - Method in interface zmq.Transfer
-
- remove() - Method in class org.zeromq.ZMsg
-
- remove(Object) - Method in class org.zeromq.ZMsg
-
- remove(Object) - Method in class zmq.MultiMap.MultiMapEntrySet
-
- remove() - Method in class zmq.MultiMap.MultiMapEntrySet
-
- remove(Object) - Method in class zmq.MultiMap
-
- removeAll(Collection<?>) - Method in class org.zeromq.ZMsg
-
- removeAll(Collection<?>) - Method in class zmq.MultiMap.MultiMapEntrySet
-
- removeFirst() - Method in class org.zeromq.ZMsg
-
- removeFirstOccurrence(Object) - Method in class org.zeromq.ZMsg
-
- removeHandle(SelectableChannel) - Method in class zmq.IOObject
-
- removeHandle(SelectableChannel) - Method in class zmq.Poller
-
- removeLast() - Method in class org.zeromq.ZMsg
-
- removeLastOccurrence(Object) - Method in class org.zeromq.ZMsg
-
- removePoller(ZMQ.PollItem) - Method in class org.zeromq.ZLoop
-
- removeTimer(Object) - Method in class org.zeromq.ZLoop
-
- renews() - Method in interface org.zeromq.ZStar.Star
-
Does the star want to renew for a new performance ?
Hint: Can be used to perform decisions to continue looping or not, or to send computed data to outputs, or ...
Key point: the inner looping mechanism just ended
Decision: to exit or not
- REP - Static variable in class org.zeromq.ZMQ
-
Flag to specify the receiving part of a REQ socket.
- Rep - Class in zmq
-
- Rep(Ctx, int, int) - Constructor for class zmq.Rep
-
- Rep.RepSession - Class in zmq
-
- RepSession(IOThread, boolean, SocketBase, Options, Address) - Constructor for class zmq.Rep.RepSession
-
- REQ - Static variable in class org.zeromq.ZMQ
-
Flag to specify a REQ socket, receiving side must be a REP.
- Req - Class in zmq
-
- Req(Ctx, int, int) - Constructor for class zmq.Req
-
- Req.ReqSession - Class in zmq
-
- ReqSession(IOThread, boolean, SocketBase, Options, Address) - Constructor for class zmq.Req.ReqSession
-
- reset(String) - Method in class org.zeromq.ZFrame
-
Sets new contents for frame
- reset(byte[]) - Method in class org.zeromq.ZFrame
-
Sets new contents for frame
- reset() - Method in class zmq.Req.ReqSession
-
- resetFlags(int) - Method in class zmq.Msg
-
- resetPollIn(SelectableChannel) - Method in class zmq.IOObject
-
- resetPollOn(SelectableChannel) - Method in class zmq.Poller
-
- resetPollOut(SelectableChannel) - Method in class zmq.IOObject
-
- resetPollOut(SelectableChannel) - Method in class zmq.Poller
-
- resolve(String, boolean) - Method in interface zmq.Address.IZAddress
-
- resolve() - Method in class zmq.Address
-
- resolve(String, boolean) - Method in class zmq.IpcAddress
-
- resolve(String, boolean) - Method in class zmq.TcpAddress
-
- resolved() - Method in class zmq.Address
-
- restart(ZMsg, ZMQ.Socket, ZProxy.Plug, Object[]) - Method in interface org.zeromq.ZProxy.Proxy
-
Performs a hot restart of the given socket.
- restart(ZMsg, ZMQ.Socket, ZProxy.Plug, Object[]) - Method in class org.zeromq.ZProxy.Proxy.SimpleProxy
-
- restart(ZMsg) - Method in class org.zeromq.ZProxy
-
Restarts the proxy.
- retainAll(Collection<?>) - Method in class org.zeromq.ZMsg
-
- retainAll(Collection<?>) - Method in class zmq.MultiMap.MultiMapEntrySet
-
- REUSE - Static variable in class org.zeromq.ZFrame
-
- rm(Pipe, Mtrie.IMtrieHandler, Object) - Method in class zmq.Mtrie
-
- rm(byte[], int, Pipe) - Method in class zmq.Mtrie
-
- rm(byte[], int) - Method in class zmq.Trie
-
- rollback() - Method in class zmq.Router
-
- ROUTER - Static variable in class org.zeromq.ZMQ
-
Flag to specify ROUTER socket (aka XREP).
- Router - Class in zmq
-
- Router(Ctx, int, int) - Constructor for class zmq.Router
-
- Router.RouterSession - Class in zmq
-
- RouterSession(IOThread, boolean, SocketBase, Options, Address) - Constructor for class zmq.Router.RouterSession
-
- run() - Method in class org.zeromq.ZMQQueue
-
- run(Object[], ZContext, ZMQ.Socket) - Method in interface org.zeromq.ZThread.IAttachedRunnable
-
- run(Object[]) - Method in interface org.zeromq.ZThread.IDetachedRunnable
-
- run() - Method in class zmq.Poller
-
- save(ZMsg, DataOutputStream) - Static method in class org.zeromq.ZMsg
-
Save message to an open data output stream.
- send(ZMsg) - Method in interface org.zeromq.ZAgent
-
Sends a control message from the Corbeille to the Plateau.
- send(ZMsg, boolean) - Method in interface org.zeromq.ZAgent
-
Sends a control message from Corbeille side to the Plateau side.
- send(String) - Method in interface org.zeromq.ZAgent
-
Sends a control message from the Corbeille to the Plateau side.
- send(String, boolean) - Method in interface org.zeromq.ZAgent
-
Sends a control message from the Corbeille to the Plateau side.
- send(ZMsg) - Method in class org.zeromq.ZAgent.SimpleAgent
-
- send(String) - Method in class org.zeromq.ZAgent.SimpleAgent
-
- send(String, boolean) - Method in class org.zeromq.ZAgent.SimpleAgent
-
- send(ZMsg, boolean) - Method in class org.zeromq.ZAgent.SimpleAgent
-
- send(ZMQ.Socket, int) - Method in class org.zeromq.ZFrame
-
Internal method to call org.zeromq.Socket send() method.
- send(String) - Method in class org.zeromq.ZMQ.Socket
-
- send(String, int) - Method in class org.zeromq.ZMQ.Socket
-
- send(byte[]) - Method in class org.zeromq.ZMQ.Socket
-
- send(byte[], int) - Method in class org.zeromq.ZMQ.Socket
-
- send(byte[], int, int, int) - Method in class org.zeromq.ZMQ.Socket
-
- send(ZMQ.Socket) - Method in class org.zeromq.ZMsg
-
Send message to 0MQ socket.
- send(ZMQ.Socket, boolean) - Method in class org.zeromq.ZMsg
-
Send message to 0MQ socket, destroys contents after sending if destroy param is set to true.
- send(ZMsg) - Method in class org.zeromq.ZStar
-
- send(ZMsg, boolean) - Method in class org.zeromq.ZStar
-
- send(String) - Method in class org.zeromq.ZStar
-
- send(String, boolean) - Method in class org.zeromq.ZStar
-
- send(Msg, ValueReference<Integer>) - Method in class zmq.LB
-
- send(Command) - Method in class zmq.Mailbox
-
- send() - Method in class zmq.Signaler
-
- send(Msg, int) - Method in class zmq.SocketBase
-
- send(SocketBase, String, int) - Static method in class zmq.ZMQ
-
- send(SocketBase, Msg, int) - Static method in class zmq.ZMQ
-
- send(SocketBase, byte[], int, int) - Static method in class zmq.ZMQ
-
- sendActivateRead(Pipe) - Method in class zmq.ZObject
-
- sendActivateWrite(Pipe, long) - Method in class zmq.ZObject
-
- sendAndDestroy(ZMQ.Socket, int) - Method in class org.zeromq.ZFrame
-
Sends frame to socket if it contains data.
- sendAndDestroy(ZMQ.Socket) - Method in class org.zeromq.ZFrame
-
Sends frame to socket if it contains data.
- sendAndKeep(ZMQ.Socket, int) - Method in class org.zeromq.ZFrame
-
Sends frame to socket if it contains any data.
- sendAndKeep(ZMQ.Socket) - Method in class org.zeromq.ZFrame
-
Sends frame to socket if it contains any data.
- sendAttach(SessionBase, IEngine) - Method in class zmq.ZObject
-
- sendAttach(SessionBase, IEngine, boolean) - Method in class zmq.ZObject
-
- sendBind(Own, Pipe) - Method in class zmq.ZObject
-
- sendBind(Own, Pipe, boolean) - Method in class zmq.ZObject
-
- sendByteBuffer(ByteBuffer, int) - Method in class org.zeromq.ZMQ.Socket
-
Send a message
- sendDone() - Method in class zmq.ZObject
-
- sendHiccup(Pipe, Object) - Method in class zmq.ZObject
-
- sendiov(SocketBase, byte[][], int, int) - Method in class zmq.ZMQ
-
- sendMore(String) - Method in class org.zeromq.ZMQ.Socket
-
- sendMore(byte[]) - Method in class org.zeromq.ZMQ.Socket
-
- sendMsg(SocketBase, Msg, int) - Static method in class zmq.ZMQ
-
- sendOwn(Own, Own) - Method in class zmq.ZObject
-
- sendPipeTerm(Pipe) - Method in class zmq.ZObject
-
- sendPipeTermAck(Pipe) - Method in class zmq.ZObject
-
- sendPlug(Own) - Method in class zmq.ZObject
-
- sendPlug(Own, boolean) - Method in class zmq.ZObject
-
- sendReap(SocketBase) - Method in class zmq.ZObject
-
- sendReaped() - Method in class zmq.ZObject
-
- sendStop() - Method in class zmq.ZObject
-
- sendTerm(Own, int) - Method in class zmq.ZObject
-
- sendTermAck(Own) - Method in class zmq.ZObject
-
- sendTermReq(Own, Own) - Method in class zmq.ZObject
-
- set(int, int) - Method in class zmq.Ctx
-
- set(V) - Method in class zmq.ValueReference
-
- setAddress(String) - Method in class zmq.IpcListener
-
- setAddress(String) - Method in class zmq.TcpListener
-
- setAffinity(long) - Method in class org.zeromq.ZMQ.Socket
-
Get the Affinity.
- setBacklog(long) - Method in class org.zeromq.ZMQ.Socket
-
- setBlocky(boolean) - Method in class org.zeromq.ZMQ.Context
-
- setBroadcastInterval(long) - Method in class org.zeromq.ZBeacon
-
- setContext(ZMQ.Context) - Method in class org.zeromq.ZContext
-
- setContextOption(Ctx, int, int) - Static method in class zmq.ZMQ
-
- setDecoder(Class<? extends DecoderBase>) - Method in class org.zeromq.ZMQ.Socket
-
Set custom Decoder
- setDelayAttachOnConnect(boolean) - Method in class org.zeromq.ZMQ.Socket
-
Accept messages only when connections are made
If set to true, will delay the attachment of a pipe on connect until the underlying connection
has completed.
- setEncoder(Class<? extends EncoderBase>) - Method in class org.zeromq.ZMQ.Socket
-
Set custom Encoder
- setFlags(int) - Method in class zmq.Msg
-
- setGlobalHandler(ZPoller.EventsHandler) - Method in class org.zeromq.ZPoller
-
Sets the global events handler for all registered sockets.
- setHandler(IPollEvents) - Method in class zmq.IOObject
-
- setHWM(int) - Method in class org.zeromq.ZContext
-
- setHWM(long) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_HWM' option shall set the high water mark for the specified 'socket'.
- setIdentity(byte[]) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_IDENTITY' option shall set the identity of the specified 'socket'.
- setIoThreads(int) - Method in class org.zeromq.ZContext
-
- setIOThreads(int) - Method in class org.zeromq.ZMQ.Context
-
Set the size of the 0MQ thread pool to handle I/O operations.
- setIPv4Only(boolean) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_IPV4ONLY' option shall set the underlying native socket type.
- setLinger(int) - Method in class org.zeromq.ZContext
-
- setLinger(long) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_LINGER' option shall retrieve the period for pending outbound
messages to linger in memory after closing the socket.
- setListener(ZBeacon.Listener) - Method in class org.zeromq.ZBeacon
-
- setMain(boolean) - Method in class org.zeromq.ZContext
-
- setMaxMsgSize(long) - Method in class org.zeromq.ZMQ.Socket
-
- setMaxSockets(int) - Method in class org.zeromq.ZMQ.Context
-
Sets the maximum number of sockets allowed on the context
- setMsgSink(IMsgSink) - Method in class zmq.Decoder
-
- setMsgSink(IMsgSink) - Method in interface zmq.IDecoder
-
- setMsgSink(IMsgSink) - Method in class zmq.V1Decoder
-
- setMsgSource(IMsgSource) - Method in class zmq.Encoder
-
- setMsgSource(IMsgSource) - Method in interface zmq.IEncoder
-
- setMsgSource(IMsgSource) - Method in class zmq.V1Encoder
-
- setMulticastHops(long) - Method in class org.zeromq.ZMQ.Socket
-
Sets the time-to-live field in every multicast packet sent from this socket.
- setMulticastLoop(boolean) - Method in class org.zeromq.ZMQ.Socket
-
Deprecated.
- setPollAccept(SelectableChannel) - Method in class zmq.IOObject
-
- setPollAccept(SelectableChannel) - Method in class zmq.Poller
-
- setPollConnect(SelectableChannel) - Method in class zmq.IOObject
-
- setPollConnect(SelectableChannel) - Method in class zmq.Poller
-
- setPollIn(SelectableChannel) - Method in class zmq.IOObject
-
- setPollIn(SelectableChannel) - Method in class zmq.Poller
-
- setPollOut(SelectableChannel) - Method in class zmq.IOObject
-
- setPollOut(SelectableChannel) - Method in class zmq.Poller
-
- setPrefix(byte[]) - Method in class org.zeromq.ZBeacon
-
- setRate(long) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_RATE' option shall set the maximum send or receive data rate for multicast
transports such as in the man page of zmq_pgm[7] using the specified 'socket'.
- setRcvHWM(long) - Method in class org.zeromq.ZMQ.Socket
-
- setReceiveBufferSize(long) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_RCVBUF' option shall set the underlying kernel receive buffer size for the
'socket' to the specified size in bytes.
- setReceiveTimeOut(int) - Method in class org.zeromq.ZMQ.Socket
-
Sets the timeout for receive operation on the socket.
- setReconnectIVL(long) - Method in class org.zeromq.ZMQ.Socket
-
- setReconnectIVLMax(long) - Method in class org.zeromq.ZMQ.Socket
-
- setRecoveryInterval(long) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_RECOVERY_IVL' option shall set the recovery interval for multicast transports
using the specified 'socket'.
- setRouterHandlover(boolean) - Method in class org.zeromq.ZMQ.Socket
-
If two clients use the same identity when connecting to a ROUTER, the
results shall depend on the ZMQ_ROUTER_HANDOVER option setting
- setRouterMandatory(boolean) - Method in class org.zeromq.ZMQ.Socket
-
Sets the ROUTER socket behavior when an unroutable message is encountered.
- setSendBufferSize(long) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_SNDBUF' option shall set the underlying kernel transmit buffer size for the
'socket' to the specified size in bytes.
- setSendTimeOut(int) - Method in class org.zeromq.ZMQ.Socket
-
Sets the timeout for send operation on the socket.
- setSndHWM(long) - Method in class org.zeromq.ZMQ.Socket
-
- setSocketOpt(int, Object) - Method in class zmq.Options
-
- setSocketOpt(int, Object) - Method in class zmq.SocketBase
-
- setSocketOption(SocketBase, int, Object) - Static method in class zmq.ZMQ
-
- setSwap(long) - Method in class org.zeromq.ZMQ.Socket
-
Deprecated.
- setTCPKeepAlive(long) - Method in class org.zeromq.ZMQ.Socket
-
Override SO_KEEPALIVE socket option (where supported by OS) to enable keep-alive packets for a socket
connection.
- setTCPKeepAlive(int) - Method in class org.zeromq.ZMQ.Socket
-
Override SO_KEEPALIVE socket option (where supported by OS) to enable keep-alive packets for a socket
connection.
- setTCPKeepAliveCount(long) - Method in class org.zeromq.ZMQ.Socket
-
Override TCP_KEEPCNT socket option (where supported by OS).
- setTCPKeepAliveIdle(long) - Method in class org.zeromq.ZMQ.Socket
-
Override TCP_KEEPCNT (or TCP_KEEPALIVE on some OS) socket option (where supported by OS).
- setTCPKeepAliveInterval(long) - Method in class org.zeromq.ZMQ.Socket
-
Override TCP_KEEPINTVL socket option (where supported by OS).
- setTimeout(long) - Method in class org.zeromq.ZMQ.Poller
-
- setValue(V) - Method in class zmq.MultiMap.MultiMapEntry
-
- setXpubVerbose(boolean) - Method in class org.zeromq.ZMQ.Socket
-
Sets the XPUB socket behavior on new subscriptions and unsubscriptions.
- shadow(ZContext) - Static method in class org.zeromq.ZContext
-
Creates new shadow context.
- SHARED - Static variable in class zmq.Msg
-
- sign() - Method in interface org.zeromq.ZAgent
-
Gives a sign if the distant Star is here.
- sign() - Method in class org.zeromq.ZAgent.SimpleAgent
-
- sign() - Method in class org.zeromq.ZStar
-
- Signaler - Class in zmq
-
- Signaler() - Constructor for class zmq.Signaler
-
- SimpleActor() - Constructor for class org.zeromq.ZActor.SimpleActor
-
- SimpleAgent(ZMQ.Socket, String) - Constructor for class org.zeromq.ZAgent.SimpleAgent
-
Creates a new simple agent.
- SimpleProxy() - Constructor for class org.zeromq.ZProxy.Proxy.SimpleProxy
-
- SimpleSet() - Constructor for class org.zeromq.ZStar.SimpleSet
-
- size() - Method in class org.zeromq.ZFrame
-
Returns byte size of frame, if set, else 0
- size() - Method in class org.zeromq.ZMsg
-
- size() - Method in class zmq.Blob
-
- size() - Method in class zmq.Msg
-
- size() - Method in class zmq.MultiMap.MultiMapEntrySet
-
- size() - Method in class zmq.MultiMap
-
- sleep(int) - Static method in class zmq.ZMQ
-
- SNDMORE - Static variable in class org.zeromq.ZMQ
-
Socket flag to indicate that more message parts are coming.
- socket(int) - Method in class org.zeromq.ZMQ.Context
-
Create a new Socket within this context.
- Socket(ZMQ.Context, int) - Constructor for class org.zeromq.ZMQ.Socket
-
Class constructor.
- Socket(SocketBase) - Constructor for class org.zeromq.ZMQ.Socket
-
- socket() - Method in interface org.zeromq.ZPoller.ItemHolder
-
- socket() - Method in class org.zeromq.ZPoller.ZPollItem
-
- socket(Ctx, int) - Static method in class zmq.ZMQ
-
- SocketBase - Class in zmq
-
- SocketBase(Ctx, int, int) - Constructor for class zmq.SocketBase
-
- stage(ZMQ.Socket, ZMQ.Socket, ZPoller, int) - Method in interface org.zeromq.ZActor.Actor
-
The actor received a message from the created sockets during a loop.
- stage(ZMQ.Socket, ZMQ.Socket, ZPoller, int) - Method in class org.zeromq.ZActor.Duo
-
- stage(ZMQ.Socket, ZMQ.Socket, ZPoller, int) - Method in class org.zeromq.ZActor.SimpleActor
-
- stalled() - Method in class zmq.DecoderBase
-
- stalled() - Method in interface zmq.IDecoder
-
- start(ZMQ.Socket, List<ZMQ.Socket>, ZPoller) - Method in interface org.zeromq.ZActor.Actor
-
Called when the double is started, before the first loop.
- start(ZMQ.Socket, List<ZMQ.Socket>, ZPoller) - Method in class org.zeromq.ZActor.Duo
-
- start(ZMQ.Socket, List<ZMQ.Socket>, ZPoller) - Method in class org.zeromq.ZActor.SimpleActor
-
- start() - Method in class org.zeromq.ZBeacon
-
- start() - Method in class org.zeromq.ZLoop
-
- start(boolean) - Method in class org.zeromq.ZProxy
-
Starts the proxy.
- start(ZThread.IDetachedRunnable, Object...) - Static method in class org.zeromq.ZThread
-
- start() - Method in class zmq.IOThread
-
- start() - Method in class zmq.Poller
-
- start() - Method in class zmq.Reaper
-
- STARTED - Static variable in class org.zeromq.ZProxy
-
- started() - Method in class org.zeromq.ZProxy
-
Binary inquiry for the status of the proxy.
- startReaping(Poller) - Method in class zmq.SocketBase
-
- startStopwatch() - Static method in class zmq.ZMQ
-
- state() - Method in class zmq.DecoderBase
-
- state(int) - Method in class zmq.DecoderBase
-
- state() - Method in class zmq.EncoderBase
-
- state(int) - Method in class zmq.EncoderBase
-
- status() - Method in class org.zeromq.ZProxy
-
Inquires for the status of the proxy.
- status(boolean) - Method in class org.zeromq.ZProxy
-
Inquires for the status of the proxy.
- stop() - Method in class org.zeromq.ZBeacon
-
- stop(boolean) - Method in class org.zeromq.ZProxy
-
Stops the proxy.
- stop() - Method in class zmq.IOThread
-
- stop() - Method in class zmq.Poller
-
- stop() - Method in class zmq.Reaper
-
- stop() - Method in class zmq.SocketBase
-
- stopMonitor() - Method in class zmq.SocketBase
-
- STOPPED - Static variable in class org.zeromq.ZProxy
-
- stopStopwatch(long) - Static method in class zmq.ZMQ
-
- StreamEngine - Class in zmq
-
- StreamEngine(SocketChannel, Options, String) - Constructor for class zmq.StreamEngine
-
- STREAMER - Static variable in class org.zeromq.ZMQ
-
Flag to specify a STREAMER device.
- streq(String) - Method in class org.zeromq.ZFrame
-
String equals.
- strerror(int) - Static method in class zmq.ZMQ
-
- strhex() - Method in class org.zeromq.ZFrame
-
- SUB - Static variable in class org.zeromq.ZMQ
-
Flag to specify the receiving part of the PUB or XPUB socket.
- Sub - Class in zmq
-
- Sub(Ctx, int, int) - Constructor for class zmq.Sub
-
- Sub.SubSession - Class in zmq
-
- subscribe(byte[]) - Method in class org.zeromq.ZMQ.Socket
-
The 'ZMQ_SUBSCRIBE' option shall establish a new message filter on a 'ZMQ_SUB' socket.
- SUBSCRIPTION_ALL - Static variable in class org.zeromq.ZMQ
-
- SUBSCRIPTION_ALL - Static variable in class zmq.ZMQ
-
- SubSession(IOThread, boolean, SocketBase, Options, Address) - Constructor for class zmq.Sub.SubSession
-
- ZActor - Class in org.zeromq
-
First implementation of a background actor remotely controlled for 0MQ.
- ZActor(ZActor.Actor, String, Object...) - Constructor for class org.zeromq.ZActor
-
Creates a new ZActor.
- ZActor(ZAgent.SelectorCreator, ZActor.Actor, String, Object...) - Constructor for class org.zeromq.ZActor
-
Creates a new ZActor.
- ZActor(ZContext, ZAgent.SelectorCreator, ZActor.Actor, String, Object[]) - Constructor for class org.zeromq.ZActor
-
Creates a new ZActor.
- ZActor.Actor - Interface in org.zeromq
-
Defines the contract for the acting instance.
- ZActor.Duo - Class in org.zeromq
-
Another actor will be called just before the main one,
without participating to the decisions.
- ZActor.SimpleActor - Class in org.zeromq
-
Simple adapter for an actor, with no sockets, blocking calls and immediate termination.
- ZAgent - Interface in org.zeromq
-
First implementation of an agent for a remotely controlled background service for 0MQ.
- ZAgent.Creator - Class in org.zeromq
-
- ZAgent.SelectorCreator - Interface in org.zeromq
-
Creates a selector and destroys it.
- ZAgent.SimpleAgent - Class in org.zeromq
-
Creates a very simple agent with an easy lock mechanism.
- ZAgent.VerySimpleSelectorCreator - Class in org.zeromq
-
- ZBeacon - Class in org.zeromq
-
- ZBeacon(int, byte[]) - Constructor for class org.zeromq.ZBeacon
-
- ZBeacon(String, int, byte[]) - Constructor for class org.zeromq.ZBeacon
-
- ZBeacon(String, int, byte[], boolean) - Constructor for class org.zeromq.ZBeacon
-
- ZBeacon.Listener - Interface in org.zeromq
-
All beacons with matching prefix are passed to a listener.
- ZContext - Class in org.zeromq
-
ZContext provides a high-level ZeroMQ context management class
It manages open sockets in the context and automatically closes these before terminating the context.
- ZContext() - Constructor for class org.zeromq.ZContext
-
Class Constructor
- ZContext(int) - Constructor for class org.zeromq.ZContext
-
- ZError - Class in zmq
-
- ZError.CtxTerminatedException - Exception in zmq
-
- ZError.InstantiationException - Exception in zmq
-
- ZError.IOException - Exception in zmq
-
- ZFrame - Class in org.zeromq
-
ZFrame
The ZFrame class provides methods to send and receive single message
frames across 0MQ sockets.
- ZFrame() - Constructor for class org.zeromq.ZFrame
-
Class Constructor
Creates an empty frame.
- ZFrame(byte[]) - Constructor for class org.zeromq.ZFrame
-
Class Constructor
Copies message data into ZFrame object
- ZFrame(String) - Constructor for class org.zeromq.ZFrame
-
Class Constructor
Copies String into frame data
- ZLoop - Class in org.zeromq
-
The ZLoop class provides an event-driven reactor pattern.
- ZLoop() - Constructor for class org.zeromq.ZLoop
-
- ZLoop.IZLoopHandler - Interface in org.zeromq
-
- zmq - package zmq
-
- ZMQ - Class in org.zeromq
-
- ZMQ - Class in zmq
-
- ZMQ() - Constructor for class zmq.ZMQ
-
- ZMQ.Context - Class in org.zeromq
-
- ZMQ.Error - Enum in org.zeromq
-
- ZMQ.Event - Class in org.zeromq
-
Inner class: Event.
- ZMQ.Event - Class in zmq
-
- ZMQ.Poller - Class in org.zeromq
-
- ZMQ.PollItem - Class in org.zeromq
-
- ZMQ.Socket - Class in org.zeromq
-
- ZMQ_AFFINITY - Static variable in class zmq.ZMQ
-
- ZMQ_BACKLOG - Static variable in class zmq.ZMQ
-
- ZMQ_BLOCKY - Static variable in class zmq.ZMQ
-
- ZMQ_DEALER - Static variable in class zmq.ZMQ
-
- ZMQ_DECODER - Static variable in class zmq.ZMQ
-
- ZMQ_DELAY_ATTACH_ON_CONNECT - Static variable in class zmq.ZMQ
-
- ZMQ_DONTWAIT - Static variable in class zmq.ZMQ
-
- ZMQ_ENCODER - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_ACCEPT_FAILED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_ACCEPTED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_ALL - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_BIND_FAILED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_CLOSE_FAILED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_CLOSED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_CONNECT_DELAYED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_CONNECT_RETRIED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_CONNECTED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_DISCONNECTED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_LISTENING - Static variable in class zmq.ZMQ
-
- ZMQ_EVENT_MONITOR_STOPPED - Static variable in class zmq.ZMQ
-
- ZMQ_EVENTS - Static variable in class zmq.ZMQ
-
- ZMQ_FAIL_UNROUTABLE - Static variable in class zmq.ZMQ
-
- ZMQ_FD - Static variable in class zmq.ZMQ
-
- ZMQ_FORWARDER - Static variable in class zmq.ZMQ
-
- ZMQ_IDENTITY - Static variable in class zmq.ZMQ
-
- ZMQ_IO_THREADS - Static variable in class zmq.ZMQ
-
- ZMQ_IO_THREADS_DFLT - Static variable in class zmq.ZMQ
-
- ZMQ_IPV4ONLY - Static variable in class zmq.ZMQ
-
- ZMQ_LAST_ENDPOINT - Static variable in class zmq.ZMQ
-
- ZMQ_LINGER - Static variable in class zmq.ZMQ
-
- ZMQ_MAX_SOCKETS - Static variable in class zmq.ZMQ
-
- ZMQ_MAX_SOCKETS_DFLT - Static variable in class zmq.ZMQ
-
- ZMQ_MAXMSGSIZE - Static variable in class zmq.ZMQ
-
- ZMQ_MORE - Static variable in class zmq.ZMQ
-
- ZMQ_MULTICAST_HOPS - Static variable in class zmq.ZMQ
-
- ZMQ_NOBLOCK - Static variable in class zmq.ZMQ
-
- ZMQ_PAIR - Static variable in class zmq.ZMQ
-
- ZMQ_POLLERR - Static variable in class zmq.ZMQ
-
- ZMQ_POLLIN - Static variable in class zmq.ZMQ
-
- ZMQ_POLLOUT - Static variable in class zmq.ZMQ
-
- ZMQ_PUB - Static variable in class zmq.ZMQ
-
- ZMQ_PULL - Static variable in class zmq.ZMQ
-
- ZMQ_PUSH - Static variable in class zmq.ZMQ
-
- ZMQ_QUEUE - Static variable in class zmq.ZMQ
-
- ZMQ_RATE - Static variable in class zmq.ZMQ
-
- ZMQ_RCVBUF - Static variable in class zmq.ZMQ
-
- ZMQ_RCVHWM - Static variable in class zmq.ZMQ
-
- ZMQ_RCVMORE - Static variable in class zmq.ZMQ
-
- ZMQ_RCVTIMEO - Static variable in class zmq.ZMQ
-
- ZMQ_RECONNECT_IVL - Static variable in class zmq.ZMQ
-
- ZMQ_RECONNECT_IVL_MAX - Static variable in class zmq.ZMQ
-
- ZMQ_RECOVERY_IVL - Static variable in class zmq.ZMQ
-
- ZMQ_REP - Static variable in class zmq.ZMQ
-
- ZMQ_REQ - Static variable in class zmq.ZMQ
-
- ZMQ_ROUTER - Static variable in class zmq.ZMQ
-
- ZMQ_ROUTER_BEHAVIOR - Static variable in class zmq.ZMQ
-
- ZMQ_ROUTER_HANDOVER - Static variable in class zmq.ZMQ
-
- ZMQ_ROUTER_MANDATORY - Static variable in class zmq.ZMQ
-
- ZMQ_SNDBUF - Static variable in class zmq.ZMQ
-
- ZMQ_SNDHWM - Static variable in class zmq.ZMQ
-
- ZMQ_SNDMORE - Static variable in class zmq.ZMQ
-
- ZMQ_SNDTIMEO - Static variable in class zmq.ZMQ
-
- ZMQ_STREAMER - Static variable in class zmq.ZMQ
-
- ZMQ_SUB - Static variable in class zmq.ZMQ
-
- ZMQ_SUBSCRIBE - Static variable in class zmq.ZMQ
-
- ZMQ_TCP_ACCEPT_FILTER - Static variable in class zmq.ZMQ
-
- ZMQ_TCP_KEEPALIVE - Static variable in class zmq.ZMQ
-
- ZMQ_TCP_KEEPALIVE_CNT - Static variable in class zmq.ZMQ
-
- ZMQ_TCP_KEEPALIVE_IDLE - Static variable in class zmq.ZMQ
-
- ZMQ_TCP_KEEPALIVE_INTVL - Static variable in class zmq.ZMQ
-
- ZMQ_TYPE - Static variable in class zmq.ZMQ
-
- ZMQ_UNSUBSCRIBE - Static variable in class zmq.ZMQ
-
- ZMQ_VERSION_MAJOR - Static variable in class zmq.ZMQ
-
- ZMQ_VERSION_MINOR - Static variable in class zmq.ZMQ
-
- ZMQ_VERSION_PATCH - Static variable in class zmq.ZMQ
-
- ZMQ_XPUB - Static variable in class zmq.ZMQ
-
- ZMQ_XPUB_VERBOSE - Static variable in class zmq.ZMQ
-
- ZMQ_XREP - Static variable in class zmq.ZMQ
-
Deprecated.
- ZMQ_XREQ - Static variable in class zmq.ZMQ
-
Deprecated.
- ZMQ_XSUB - Static variable in class zmq.ZMQ
-
- ZMQException - Exception in org.zeromq
-
- ZMQException(int) - Constructor for exception org.zeromq.ZMQException
-
- ZMQException(String, int) - Constructor for exception org.zeromq.ZMQException
-
- ZMQException(ZMQException) - Constructor for exception org.zeromq.ZMQException
-
- ZMQException.IOException - Exception in org.zeromq
-
- ZMQQueue - Class in org.zeromq
-
- ZMQQueue(ZMQ.Context, ZMQ.Socket, ZMQ.Socket) - Constructor for class org.zeromq.ZMQQueue
-
Class constructor.
- ZMsg - Class in org.zeromq
-
The ZMsg class provides methods to send and receive multipart messages
across 0MQ sockets.
- ZMsg() - Constructor for class org.zeromq.ZMsg
-
Class Constructor
- ZObject - Class in zmq
-
- ZObject(Ctx, int) - Constructor for class zmq.ZObject
-
- ZObject(ZObject) - Constructor for class zmq.ZObject
-
- ZPoller - Class in org.zeromq
-
Rewritten poller for 0MQ.
- ZPoller(ZPoller) - Constructor for class org.zeromq.ZPoller
-
Creates a new poller based on the current one.
- ZPoller(Selector) - Constructor for class org.zeromq.ZPoller
-
Creates a new poller with a given selector for operational polling.
- ZPoller(ZPoller.ItemCreator, ZPoller) - Constructor for class org.zeromq.ZPoller
-
Creates a new poller based on the current one.
- ZPoller(ZPoller.ItemCreator, Selector) - Constructor for class org.zeromq.ZPoller
-
Creates a new poller.
- ZPoller.EventsHandler - Interface in org.zeromq
-
- ZPoller.ItemCreator - Interface in org.zeromq
-
- ZPoller.ItemHolder - Interface in org.zeromq
-
- ZPoller.ZPollItem - Class in org.zeromq
-
- ZPollItem(ZMQ.Socket, ZPoller.EventsHandler, int) - Constructor for class org.zeromq.ZPoller.ZPollItem
-
- ZPollItem(SelectableChannel, ZPoller.EventsHandler, int) - Constructor for class org.zeromq.ZPoller.ZPollItem
-
- ZProxy - Class in org.zeromq
-
Implementation of a remotely controlled proxy for 0MQ, using
ZActor
.
- ZProxy(ZAgent.SelectorCreator, ZProxy.Proxy, String, Object...) - Constructor for class org.zeromq.ZProxy
-
Creates a new unnamed proxy.
- ZProxy(String, ZAgent.SelectorCreator, ZProxy.Proxy, String, Object...) - Constructor for class org.zeromq.ZProxy
-
Creates a new named proxy.
- ZProxy(ZContext, String, ZAgent.SelectorCreator, ZProxy.Proxy, ZProxy.Pump, String, Object...) - Constructor for class org.zeromq.ZProxy
-
Creates a new named proxy.
- ZProxy.Command - Enum in org.zeromq
-
- ZProxy.Plug - Enum in org.zeromq
-
Possible places for sockets in the proxy.
- ZProxy.Proxy - Interface in org.zeromq
-
- ZProxy.Proxy.SimpleProxy - Class in org.zeromq
-
- ZProxy.Pump - Interface in org.zeromq
-
- ZProxy.State - Enum in org.zeromq
-
- ZProxy.ZPump - Class in org.zeromq
-
A pump that reads a message as a whole before transmitting it.
- ZProxy.ZPump.Transformer - Interface in org.zeromq
-
- ZPump() - Constructor for class org.zeromq.ZProxy.ZPump
-
- ZPump(ZProxy.ZPump.Transformer) - Constructor for class org.zeromq.ZProxy.ZPump
-
- ZStar - Class in org.zeromq
-
First implementation for the base of a remotely controlled background service for 0MQ.
- ZStar(ZStar.Fortune, String, Object...) - Constructor for class org.zeromq.ZStar
-
Creates a new ZStar.
- ZStar(ZAgent.SelectorCreator, ZStar.Fortune, String, Object...) - Constructor for class org.zeromq.ZStar
-
Creates a new ZStar.
- ZStar(ZContext, ZAgent.SelectorCreator, ZStar.Fortune, String, Object[]) - Constructor for class org.zeromq.ZStar
-
Creates a new ZStar.
- ZStar.Entourage - Interface in org.zeromq
-
Utility class with calls surrounding the execution of the Star.
- ZStar.Fortune - Interface in org.zeromq
-
- ZStar.Set - Interface in org.zeromq
-
- ZStar.SimpleSet - Class in org.zeromq
-
- ZStar.Star - Interface in org.zeromq
-
Contract interface when acting in plain sight.
- ZStar.TimeTaker - Interface in org.zeromq
-
Utility class with callback for when the Star has finished its performances.
- ZThread - Class in org.zeromq
-
- ZThread.IAttachedRunnable - Interface in org.zeromq
-
- ZThread.IDetachedRunnable - Interface in org.zeromq
-